Publicidad
Idiomas disponibles
Idiomas disponibles
HANDLING
Before
moving
the
unit,
the sizes, weights, centre of gravi-
ty and lifting points, then check that
the equipment for lifting and posi-
tioning are suitable and comply with
safety regulations currently in force.
Particular attention must be paid to all
the loading, unloading and lifting opera-
tions so as to avoid hazardous situations
for people and damage to the structure
and operational parts of the machine.
Under no circumstances may objects
be placed on top of the unit. Personnel
engaged in handling the machine must
have the proper personal protection
devices. Under no circumstance must
anybody or anything stop under the unit
even briefly. During lifting you are advi-
sed to fit anti-vibration mountings and
fix them to the relative holes on the
base unit in accordance with the moun-
ting schematic supplied with the acces-
sories (VT).
Positioning
The machines in the ANZ series must
be installed externally in an area that is
suitable for the purpose that has the re-
quired technical spaces. This is essential
both to allow interventions of ordinary
and extraordinary maintenance and for
operating requirements For the proper
functioning of the unit it must be instal-
led on a perfectly flat surface. Make sure
that the resting surface is able to bear
the weight of the machine. The device
is made of galvanised steel sheet and
hot painted with polyester powders to
resist bad weather. This means that no
particular measures have to be taken to
protect the unit. If the machine is to be
placed in a particularly windy position,
wind breaks must be provided to avoid
the DCPX operating in an unstable con-
dition.
N.B. The appliance must be installed in
such a way that maintenance and/or
4
Receipt of the product
examine
!
!
!
repair operations are possible. The war-
ranty of the device does not in any case
cover costs incurred as a result of mo-
torised ladders, scaffolding or any other
MOD.
Minimum technical spaces
mm
S1
0207
150
0257
250
0307
250
0417
300
0507
300
0807
300
0907
300
1007
750
1507
750
2007
750
in the models with accumulation, the distance
(*)
S2 becomes 1400 mm
S2
S3
S4
500
150
500
500
250
500
500
250
500
500
300
500
500
300
500
500
300
500
500
300
500
300
750
1300
(*)
300
750
1300
(*)
300
750
1300
(*)
S4
!
MAX
!
MAX
lifting systems made necessary to carry
out the operations under warranty.
S1
ANZ
S3
!
MAX
S2
Publicidad
