IKUSI One Sat 118 Manual De Usuario página 32

Introduction / General equipment use
SAT1 gain = 40 dB.
F
SAT2 gain = -1.5 dB.
F
Outputs (2 configurable outputs):
J
a)
2 TV+FI outputs
F
2 Test outputs
F
VHF output level = 113 dBµV.
F
UHF output level = 118 dBµV.
F
FI/SAT output level = 116 dBμV.
F
b)
1 TV+FI output
F
1 Test output
F
VHF output level = 118 dBµV.
F
UHF output level = 123 dBµV.
F
FI/SAT output level = 116 dBμV.
F
1
Terrestrial: IMD3-60 dB, DIN 45004B
2
Satellite: IMD3 -35dB, EN50083-3. See channel reduction table in Technical Annex
General equipment use
Interaction with the equipment using the button and the interpreting of the instructions
displayed on the LCD screen are described below. The programme includes a main menu
formed by submenus that can be selected to modify the equipment operating settings.
Instructions displayed on the LCD screen
This symbol is displayed when manual setting is selected. It refers to the
clusters indicated on the panel.
This symbol is displayed in the manual setting menu. Visually locate it on
the LCD screen and see the cluster map on the panel to see which of the
5 equipment clusters is selected.
This acronym is displayed in the main menu. Select it to go back to the
language selection menu.
This symbol is displayed in manual settings and advanced settings and
visually indicates the possibility of moving vertically.
This symbol is displayed in manual and advanced settings and always
includes a numeric value and visually indicates the gain level.
32
1
1
2
1
1
2