Tabla de contenido
Publicidad
Read the operating instructions and the enclosed
!
brochure „Guarantee and additional notices"
completely. Follow the instructions they contain.
Safely keep these documents for future reference.
Function/Application
Voltage and continuity tester for automatic measurement
of AC (alternating current) and DC (direct current) voltages.
The device can be used to perform a single-phase test and a
The information is indicated by means of an LED display and
an acoustic signal.
Safety instructions
The device must only be used in accordance with its intended
Before every measurement make sure that the area to be
checked (e.g. line) and the tester are in perfect operating
condition. Test the device by connecting it to known
voltage sources (e.g. a 230 V socket in the case of AC
testing or a car battery in the case of DC testing). Stop
using the device if one or a number of its functions fails.
DC, exercise extreme caution. Touching the electrical conduc-
tors at such voltages poses a risk of life-threatening electric
Do not use the device in environments in which there are
con-ductive particles or where the occurrence of moisture (in
the form of condensation, for example) can create transient
conductivity.
conductive residue, work must not be carried out under
presence of moisture creates the risk of life-threatening
electric shocks. Clean and dry the device before use. When
using the device outdoors, make sure that the weather
conditions are appropriate and/or that suitable protection
measures are taken.
If you are taking measurements in the hazardous vicinity of
electrical installations, do not work alone and seek guidance
from an electrically skilled person before starting work.
08
GB
Publicidad
Tabla de contenido
