Basic Settings; Change Settings - Dörr SNAPSHOT LIMITED 5.0 S Manual De Instrucciones

06 | SETTINGS
Switch the slide control (08) to position ON and close the camera housing. After 15-30 seconds the camera is ready, and it records
upon movement according to the basic settings:

06.1 Basic settings

06.2 Change settings

In order to change the camera settings, switch the slide control (08) to SETUP position and press the MENU button (09). The LCD
camera display (07) shows a list of various menu options:
Press the navigation buttons (10) ◄ or ► to browse through the registers (CAM, PIR, SYS).
·
Press the navigation buttons (10) ▼or ▲to select the submenu. The selected submenu is highlighted in white.
·
Press the navigation buttons (10) ◄ or ► to change the submenu.
·
·
To save your settings press the OK button (11). To leave setup without saving, press the MENU button (09).
18
Camera symbol
5M (factory setting)
Battery symbol
[00000/00000m]
Single picture mode
Resolution 5 Mega Pixels
Battery status
Stored pictures on SD card/free capacity
doerr-outdoor.de