09 | STARTING THE CAMERA/CONTROL OF THE CAMERA
09.1 Starting the camera
In order to get the camera started switch the slide control (08) to position ON and close the camera housing. After about 15 - 30 sec.
the camera is active and starts surveillance according to your settings.
09.2 Control of the camera
To check if the camera has taken pictures:
Open the camera housing and switch slide control (08) to position OFF. After about 2 seconds switch
the slide control (08) to SETUP position.
The LCD camera display (07) shows the start screen. The lower line shows the number of pictures taken and the remaining
memory – Example: [0034/1846].
It is recommended to check the battery status as well. When capacity goes down, it will be more difficult to achieve correctly
illuminated night shots. In case of doubt, replace batteries by new ones.
10 | CLEANING AND STORAGE
Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft, slightly damp microfiber cloth to clean
the outer parts of the device. Make sure to remove the batteries before cleaning. Store the device in a dust-free, dry and cool place
when not in use. This device is not a toy – keep it out of reach of children. Keep the device away from pets.
24
doerr-outdoor.de