Carat Dustcatch Pro Manual De Instrucciones página 12

[ p ]
Fig.10
6. Tighten [e] Flange Bolt x 4pcs by [p] Hex Wrench.
(Fig.10)
7. Remove [d] Centering Holder.
8. Set the proper Spacer [g] / [h] / [ i ] / [k] / [m] on the
spindle of the angle grinder.
==> See the table below.
9. Set [ f ] Base Flange on Spacer.
10. Set the Diamond Grinding Cup on [ f ] Base Flange
and tighten the Lock Nut by Wrench.
(Fig. 11)
METABO Hi-KOKI
[g]
T3.5
11. Confirm the clearance (min.1mm) between the Diamond Grinding Cup and the material. (Fig.12 and 13)
Fig.12
Min. Clearance 1mm
12. Fit the Handle to the angle grinder.
13. Connect the Vacuum Hose to the Duct of the [a] Main
Body using [q] Hose Connector.
(Fig.14)
[CAUTION]
Use the Vacuum with Input Power 1,500W or more for best
possible performance and dust extraction.
-12-
[ e ]
MILWAUKEE BOSCH
[ h ]
T6.0
Fig.13
O K
Vacuum
Wrench
Diamond
Grinding
Cup
[ d ]
DEWALT
[ i ]
T7.5
[ q ]
Duct
Lock Nut
[ f ]
[g] [h] [i] [k] [m]
Fig.11
MAKITA FLEX
[k] [m]
T9.4 T10.6
N G
Handle
Fig.14