Restore Default Values: Reset; Reset Mapping - Fermax VIDEO CITYLINE DUOX 1L Manual De Instalador

DUO DUO X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L
DUO DUO DUOX CITYLINE KIT 1-2L X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L
DUO DUO DUOX CITYLINE KIT 1-2L X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L
DUO DUO X CITYLINE KIT 1-2L
M)
JP1
Camera LEDS
JP2 :
Line termination integrated into the amplifier for possible use.
IMPORTANT NOTE:
Camera focus
To adjust the camera's image, see ANNEX: Voice assisted configuration in button panels.
Instructions included with this equipment.
You can also adjust it by temporarily connecting a keypad (ref. 7439) or via the duox
programmer (ref. 3254) locally connected.
Download the manuals at: www.fermax.com
- Direct Video Duox Panels Programming Manual, cod. 97900.
- DUOX Programmer Manual ref 3254, cod. 97731.
RESTORE TO DEFAULT VALUES: Reset
The DUOX amplifier has a 'Reset' function which can be used to restore programmed
default parameters.
RESET Mapping (call button code)
1º.- Reset amplifier: remove power.
2º.- With the SW1 button pressed, power and maintain the SW1 button for 5 seconds. The
LED will blink quickly to indicate that button mapping has been restored.
Programming Lock Release Times
There are two programmable lock-release activation times:
- Lock-release time set from the residence.
- Lock-release time set from the exit button (connected to the 'BS' and '-' terminals).
Notes:
• Values:
- Lock-release time:
- Exit button time:
The door open times can be changed in different ways:
a) Voice assisted Programming
You can also program the opening times via the amplifier's voice assisted configuration.
For more information see ANNEX: Voice assisted configuration in button panels. Instruc-
tions included with this equipment.
b) Programming from keyboard.
You can also programme lock-release times using a keypad ref. 7439. To enter the
numeric values you must temporarily connect this keypad .
For more information download the DUOX Video Direct Panels Programming Manual, cod.
97900) available at www.fermax.com. The keypad and amplifier connection is explained in
said manual.
Page 10
LEDS ON
lit when the camera is activated
01..99 sec. (Default: 03.
00..99 sec. (Default: 06). Deactivated 00.
LEDS OFF
Always Off