Descargar Imprimir esta página

Coelbo Speedcenter S101040 Manual De Instrucciones página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

Warranty _____________________________________________________________________
Product Speedcenter is guaranteed the first 2 years after its production date.
This guarantee does not include damages in case of an inadequate installation or manipulation.
Recommendations _____________________________________________________________
 
Read carefully this instructions manual before installation.
Do not throw away this manual afer installation, it can be usefull for later modifications or for solving the different
types of alarms.
Before doing any maintenance inside the device, it must be unplugged from the electric supply and wait
a minimum of 2 minutes after the disconnection to avoid electrical discharges.
Description _______________________________________________________
This device is a communication center between units Speedmatic 101110 Master or Speedmatic 1314 Master.
It can communicate up to 4 units Speedmatic 101110/1314 operating in Master-slave modality, managing the start
and stop of these devices. Speedcenter includes a control panel with LCD screen, warning led-lights, push-buttons
for configuration and manual start-stop. It is electrically supplied directly from the Speedmatic through the
communication cables.
It also incorporates a volt-free contact for monitoring the alarms displayed in screen originated
by irregularities or problems of the system.
Classification and type _______________________________________________
According to EN-60730-1 the Speedcenter is under its scope.
Technical characteristics___________
General supply
Communication ports
Wiring
Protection index
Max. environment temperature
Dimensions
Screen
Assembly_______________________________________________________
 
Max. permissible temperature is 80ºC. Do not assembly near a heat source
Including: base, terminal compartment cover with EPDM gasket and screws for mounting plate/DIN-rail, transparent
cover with PUR gasket, hinges, locking devices.
Distance between Speedcenter and Speedmatic must be less than 20 m.
___________________________________
Speedcenter S101040
12 Vcc
4
4x0.25
IP 65
55ºC
180X190X132
STN-Grafic 64x128 digit
Speedcenter S101228
230 Vcc
4
4x0.25
IP 65
55ºC
180X190X132
STN-Grafic 64x128 digit
-2-
English

Publicidad

loading

Este manual también es adecuado para:

Speedcenter s101228