Scan Function - Trevi CMP 581 DAB Manual De Uso E Instalación

ENGLISH
VOLUME CONTROL
1. Use the VOLUME + (12) and VOLUME - (10) buttons to increase or decrease the volume.
DAB / DAB + RADIO
SCAN DAB / DAB + RADIO STATIONS
1. Select the DAB source by pressing the STANDBY / FUNC button (6). The writing Welcome to DAB will appear.
When you switch it on for the first time, the radio will automatically scan and store all the available DAB stations.
2. If you want to repeat the scan operation of the available DAB stations, long press the STOP / MENU / INFO button (3) to access
the DAB menu. Full scan will appear.
3. Press the PLAY / PAUSE / SELECT button (7) to start scanning the DAB stations.
4. Press the SKIP- (4) or SKIP + (8) button to scroll through the various tuned DAB stations. Press the PLAY / PAUSE / SELECT
button (7) on the desired DAB station to start playback.
5. Press the STOP / MENU / INFO (3) key several times to display information about the received station.
MENU
1. Long press the STOP / MENU / INFO button (3) to access the DAB menu.
2. Press the SKIP- (4) or SKIP + (8) button to display the various DAB menu items.
3. Press the PLAY / PAUSE / SELECT button (7) to select the displayed menu item.
Full scan: allows you to scan the entire DAB / DAB + band and automatically store the found stations.
Manual tune: allows you to manually scan a single DAB / DAB + frequency. Press the SKIP- (4) or SKIP + (8) button to select the
channel number for the frequency to be scanned and then press the PLAY / PAUSE / SELECT button (7) to start scanning. The
found stations will be automatically stored. At the end, press the STOP / MENU / INFO (3) key for a long time to return to the DAB
menu.
DRC: allows you to enable / disable the DRC function to improve the sound while listening in noisy environments. The DRC level
can be set up (high), low (low) or OFF (off).
Prune (Delete): allows you to delete from the list of stations stored all the radio found but not available (poor signal). Move with the
SKIP- (4) or SKIP + (8) button to Yes and confirm the deletion with the PLAY / PAUSE / SELECT button (7).
System (System): allows access to the system submenu:
Language: it is possible to choose the language of the menus; Italian (default) and English are available.
Factory Reset: allows you to reset the device to the factory settings. At the end of the reset an automatic scan of the DAB / DAB
+ stations will be performed.
SW version (Software version): allows you to view the software version of the device.
STORING RADIO STATIONS
To store a radio station, perform the following steps:
1. Tune to the desired radio station by manual tuning.
2. Long press the MEM./P-MODE button (2), the display will show PRESET STORE
3. Use the SKIP- (4) or SKIP + (8) buttons to select a memory location.
4. Press the PLAY / PAUSE / SELECT button (7) to confirm and save the radio station.
Repeat this operation for each radio station you want to save. There are 30 memory locations available.
FM RADIO

SCAN FUNCTION

1. Select the FM source. The word FM MODE will appear.
2. Press and hold the PLAY / PAUSE / SELECT button (7) to start scanning FM stations. The first 30 stations received will be auto-
matically stored.
3. Press the MEM./P-MODE button (2) and the SKIP- button (4) or SKIP + (8) to scroll through the various FM stations stored. Press
the PLAY / PAUSE / SELECT button (7) on the desired FM station to start playback.
4. Use the SKIP- (4) or SKIP + (8) keys to manually search for a radio station.
5. Press the STOP / MENU / INFO button (3) several times to display information on the received station.
NOTE
To obtain the best FM reception, extend and orient the antenna (17). If reception is not good try to adjust the length and orientation of
the antenna differently, however the quality of FM reception depends very much on the place where the device is placed.
The proximity of TV sets, neon lamps or other domestic appliances may cause disturbances in the reception of radio programs, in this
case move the radio recorder away from the disturbing device.
MENU
1. Long press the STOP / MENU / INFO (3) button to enter the FM menu.
2. Press the SKIP- (10) or SKIP + (12) button to display the various FM menu items.
3. Press the PLAY / PAUSE / SELECT / SCAN (9) button to select the displayed menu item:
Scan setting: allows you to set the search for radio stations on all stations found (All stations) or only on those with strong signal
(Strong station).
Audio setting: allows you to set audio in stereo (Stereo allowed) or mono (Forced mono).
System: allows access to the system menu (see RADIO DAB / DAB + MENU).
10
CMP 581 DAB