Installing The Camera; Description Of The Camera - Extel WESVCM 82501 Instrucciones De Uso

Dimensions : 164 x 64 x 42 (mm).
Resolution : 640 x 480 pixels at 25 frames/s.
Viewing angle : 53°.
Digital link between the camera and the monitor (this technology limits interference and
disturbances in the link).
Range : approximately 150 m in free field.

4. INSTALLING THE CAMERA

CAUTION
a. Description of the camera
1
2
3
4
1. Adjustable antenna to be screwed at the back of the camera.
2. Protection of the cameras (IP 44).
3. Lens of the camera.
4. Screw to fix the position of the camera.
5. Camera bracket.
6. Microphone (in the empty part of the housing).
7. Plug to connect the adaptor.
8. Cell to activate the IR diodes, in the darkness.
9. Infrared diode (non visible lighting system)
10. Red light indicator, confirming the power supply of the camera.
11. Green light indicator, indicates that the camera is displayed on the monitor.
12. Fixing screw for the U-bolt
13. Button to associate the camera with its monitor: « Pairing key ».
14. 5 V adaptor.
b. Installing the camera
Choose a suitable location to install the camera.
As far as possible your system must be installed in a dust-free place with weak vibrations
and a good circulation of air and must be equipped with a wall socket for the 5 V adaptor.
GB3
Be sure any element does not avoid inserting the screws
in the wall.
11
10
7
3 8 9
CFI EXTEL WESVCM 82501 - 04/2012 - V1
12
13
14
6