Mach Power HC-HASAN60 Manual De Usuario página 6

Note: Please add clean tap water below 40 °C.
5. Connect the AC power supply and hear a "beep" sound. At this time, the screen
will light up, and The indicator is powered on and enters the standby mode, and
displays the humidity and temperature of the space.
6. There are 5 touch keys on the base, which are "fog", "timing" and "constant"
"Wet", "power", "sleep / sterilization". (explain in detail as follows)
After connecting the power supply, touch the power button, the display will light
up, and the machine will work, the default gear is 1 when the machine is turned
on. The display screen shows the current temperature and humidity, and the color
of the night light starts Change. Touch the power button again to stop the humi-
difier.
Press the fog key, and the display screen will display the corresponding grade
"Fog" is selected from the "1-3" file, and the default is the maximum.
a. Presses the "sleep" key to close the display screen when the machine is turned
on Any key lights up the display.
b. Long press "sterilization" to turn on the sterilization function, Press and hold
again to close.
Press the timing key to set the time and time of shutdown Range 1-12 hours' cycle
setting. After the timing is set, the display screen is warm Degree, timing digital
alternate display.
Touch "constant humidity" to increase the humidity by 5% RH to reach the ma-
ximum humidity in addition to constant humidity setting, humidity adjustment
range is "60% - 90%", humidity function When on, the constant humidity icon
lights up. Adjust in this cycle.
6