1
Remove all packaging materials (refer to Section A, Fig. A).
2
Fill the removable tank I and wait 30 minutes before you
ignite the heater (refer to Section B, Fig. I).
3
Insert the batteries into the battery holder L
(refer to Section A, Fig. G).
4
Check whether the combustion chamber D is fully upright
(refer to Section A, Fig. F).
5
Ignite the heater by turning the knurled wick adjustment
knob B as far to the right as possible and then gently push the
ignition button C (refer to Section C, Fig. K and L).
6
After igniting the heater it will take 10 to 15 minutes before
you can check if the heater burns well (refer to Section D).
7
Switch off the heater (refer to Section E).
e e
e e e e
e
geneRal diRections foR Use
Below you will find the main steps to be taken for
using your heater. For more details, please refer to
the MANUAL (pages 53 ff.).
•
The first time you ignite your heater it will smell
like 'new' for a short time.
•
Store your fuel in a cool and dark place.
•
Fuel has a limited shelf life. Start every heating
season with new fuel.
•
The right quality of fuel will be assured, when you
use Zibro Premium Quality Fuels for your heater.
•
If you change to another brand and/or type
of paraffin oil, you must first finish up all the
remaining fuel in the heater.
•
Avoid any contact with the top plate and grille.
e
e
e
e
e
e
e
e
e
e
e
e
e
e
MAIN COMPONENTS
A
OFF - button
Knurled wick
B
adjustment knob
C
Ignition button
Combustion
4
chamber
E
Combustion
chamber handle
F
Fuel indicator
G
Grill
Lid for removable
H
tank
I
Removable tank
J
Fuel gauge
removable tank
K
Ignition coil
L
Battery holder
e
e
e
e
e
4
63