Sony FL-T01 Manual De Instrucciones página 4

Getting the unit ready for use
This unit is designed to be used when attached to a table, and the dedicated table stand and the VESA mounting
bracket are recommended (page 9).
For recommended projection surfaces, see "About the projection surface" (page 3).
The following explains how to use the table stand:
1
Attach the arm to the unit.
Secure firmly with the screws (M3×10) supplied
with the table stand.
2
Fix the stand base at desired height.
Secure firmly by tightening the adjusting screw.
3
Attach the stand to the middle of the
table's edge.
Secure firmly by tightening the clamping bar.
4
GB
