Sony FL-T01 Manual De Instrucciones página 7

Precautions
For your safety
• Do not let water or foreign objects get into the unit. It may
cause a fire or electric shock. If water or foreign objects have
gotten into the unit, turn it off immediately, and disconnect
the power cord (mains lead) and connection cables.
• Do not disassemble or modify the unit. It may cause a
malfunction, fire or electric shock.
• If there is a possibility of lightning strike, do not use the unit.
A lightning strike may cause an electric shock. If lightning is
likely, unplug the unit to prevent a fire, electric shock and
malfunction.
On safety
• Wireless functions are incorporated into this unit. Radio
waves may affect the operation of other devices. Do not use
this device in the following locations.
– On an airplane.
– Near automatically-controlled equipment, such as
automatic doors or fire alarms.
If other equipment experiences problems such as
interference while the unit is being used, immediately stop
using the unit.
• Do not continue viewing the projected screen for a long
time. Continuously viewing the projected screen for a long
time may cause eye strain. If you feel any discomfort or
pain, immediately stop using the unit and have a rest. If the
discomfort or pain persists after taking a rest, consult a
doctor.
• Do not place any reflective objects on the projected screen.
The light may be reflected into your eyes and may adversely
affect them.
• Keep the unit away from children. If a cable becomes
wrapped around the neck or similar misuse, it may cause an
accident or injury.
On handling
• If the unit is not to be used for a long time, unplug it.
• Do not drop, hit, compress, or put a heavy object on the
unit.
• The operating temperature range of the unit is 5 °C to 35 °C.
If the unit is used in an extremely cold or hot place outside
the operating temperature range, it may cause a
malfunction.
• The wireless function of the unit is designed for use in your
country/region only. Each country/region has its own
regulations for radio wave use, therefore if you use the
wireless function of the unit abroad, you may be penalized.
• Do not place the unit where there is excessive oily smoke,
steam, moisture or dust. It may cause a fire or electric shock.
• Do not install the unit in a dangerously unsuitable location.
The unit may fall causing an injury.
• Do not subject the unit to a strong impact. If you apply a
strong force to the unit, such as putting a heavy object on it,
drop it, or step on it, it may cause injuries or a malfunction.
Although the projection window is made of tempered glass,
if it is strongly pushed or struck, it may break causing
injuries.
• Take care not to drop the unit when moving it. If the unit
falls, it may break or cause injuries.
On placement
• Do not place the unit in any places where there is excessive
dust or cigarette smoke. Dust and cigarette tar adheres to
components inside the unit (such as the projection window)
causing a malfunction.
• Do not place the unit in any places where the temperature
is extremely hot or cold, or the humidity is extremely high.
Especially when there is strong sunshine or during the
summer, the inside of a car can get quite hot, and a unit left
in the car may deform or malfunction.
• Be sure to use the dedicated table stand and mounting
bracket to assemble the unit. Otherwise the unit may fall
causing an injury.
• Do not place the unit on an unstable table. The unit may fall
or topple over resulting in injuries.
• Do not place the unit where there is water. It may cause a
fire or electric shock.
• Do not place/store the unit in a place exposed to direct
sunlight or close to a heater. Heat may build up in the unit
causing a fire.
On AC adaptor and cables
• Do not damage the power cord (mains lead). It may cause a
fire or electric shock.
• Be sure to use the supplied AC adaptor with the unit. If a
different AC adaptor is used with the unit, it may cause a
fire, electric shock or malfunction.
• Do not touch the power plug with wet hands. It may cause
an electric shock.
• Before making connections with the AC adaptor and
connection cables, turn off the unit and connected
equipment, and unplug the power plugs from the wall
outlet.
• Do not wrap the power cord (mains lead) or connection
cable around the AC adaptor. It may cause the cord or cable
to break.
• Before moving the unit, disconnect the power cord (mains
lead) and connection cables. The cables may be damaged
resulting in a fire or electric shock, or connected equipment
may fall or topple over causing injuries.
• Insert the connector straight. If it is inserted at an angle,
pins may make a short circuit causing a fire.
On fan noise
A fan is incorporated inside the projector to prevent
overheating, and this makes a slight noise while turned on.
This noise is not a malfunction. However, if there are any
abnormal noises, consult qualified Sony personnel.
On light source maintenance
This unit uses a laser, therefore special caution and facilities
are necessary for the inspection and maintenance of light
source components. Be sure to consult qualified Sony
personnel.
7
GB