Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
Sander Operation
WARNING: Let the tool work at its own pace. Do
not overload.
Grasp the sander and turn it ON. Move it in long, sweeping
strokes along the surface, letting it do the work. Pushing
down on the tool while sanding actually slows the removal
rate and produces an inferior quality finish.
Check your work often. This sander is capable of removing
material rapidly.
Detail Sanding
Your tool is equipped with a teardrop base which allows you
to use it on large flat surfaces and tight spots or corners.
The pad tips may wear unevenly, depending on use.
Hints for Optimum Use
•
Do not place your hands over the ventilation slots.
•
Do not exert too much pressure on the tool.
•
Regularly check the condition of the sanding sheet.
Replace when necessary.
•
Always sand with the grain of the wood.
•
When sanding new layers of paint before applying
another layer, use extra fine grit.
•
On very uneven surfaces, or when removing layers of
paint, start with a coarse grit. On other surfaces, start
with a medium grit. In both cases, gradually change to a
fine grit for a smooth finish.
•
When sanding on a vertical surface, hold the back
handle
2
for better grip and control as shown in Fig. E.
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can cause injury.
Cleaning
WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this procedure.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into a liquid.
6
Accessories
WARNING: Since accessories, other than those
offered by BLACK+DECKER, have not been tested with
this product, use of such accessories with this tool
could be hazardous. To reduce the risk of injury, only
BLACK+DECKER recommended accessories should be
used with this product.
Recommended accessories for use with your tool are available
at extra cost from your local dealer or authorized service
center. If you need assistance in locating any accessory, please
contact BLACK+DECKER call 1-800-544-6986.
A variety of Mouse® accessories are available at extra cost.
Listings per retailer may vary.
nOTE: Use only sandpaper with holes in the same
configuration as on the base of the sander. Sandpaper
without holes will not allow dust to enter the canister.
The hook and loop pad and individual bases are replaceable
parts. If they become worn, contact your local service center.
For more information call: 1-800-544-6986.
WARNING: The use of any accessory not
recommended for use with this appliance could
be hazardous.
Application / Accessory Matrix
Accessory
Medium grit sandpaper
Fine grit sandpaper
Extra fine grit sandpaper
Detail sanding tips
1 OT polishing / stripping wool
4 OT fine polishing wool
Grey foam pad
White non-woven pad
Red non-woven pad
The pads described above may be available in kits where
Mouse® products are sold. For more information call
1-800-544-6986.
Repairs
WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including power cord repairs, and brush inspection
and replacement, when applicable) should be
performed by a BLACK+DECKER factory service center
or a BLACK+DECKER authorized service center. Always
use identical replacement parts.
Recommended
Applications/Uses
Paint, varnish, rust removal
Surface blending and finishing
Sanding between coats of paint
or varnish
Corners / hard to reach places
Polishing metals / stripping
varnish or urethane
Fine polishing, satin finish on
paint / varnish / urethane
Applying and removing polish
Light scrubbing
Heavy scrubbing / rust removal
Publicidad
Tabla de contenido
