Aux Mode - Peaq PDR300-W Manual De Instrucciones

AUX Mode

Auxiliary input
Audio In
Today's Date
27 / 07 / 2011
1. Connect the audio cable (not included)
into the AUX IN jack (3.5 mm) at the rear
side of the device.
2. Press Source to select AUX as a source.
3. Start playing from the device.
Attention
Before an external playing device is con-
nected, these Instructions for Use and the
Safety Notes, and, if applicable, information
on use with other devices must be adhered
to closely.
PDR300_IM_I_06.indb 63 b1
BLUETOOTH MODE
AUX in
08 : 30
1. Press the Source several times to select
2. Activate the Bluetooth function of the AV
3. The Bluetooth ID of the loudspeaker is
4. Enter the password of 0000 if required.
5. Once both devices have been coupled,
COUPLING ADDITIONAL DEVICES
You can couple up to 8 devices using Blue-
tooth. Follow steps 1 to 5, if you would like to
couple more devices.
Bluetooth
Bluetooth.
source and combine it with the Radio.
Note
Before coupling a Bluetooth-AV source,
pay attention to instructions for use with
respect to safety notes and use with
other devices.
PDR300.
this lights up steadily.
ENGLISH
63
7/23/13 4:50 PM