Before You Call
CONCERN
DOOR PROBLEMS
Door will not close.
LIGHT IS NOT ON
Light is not on.
POTENTIAL CAUSE
• Appliance is not
level. It rocks on
the floor when it is
moved slightly.
• Floor is uneven or
weak. Appliance
rocks on floor when
it is moved slightly.
• The light is burned
out or LED light
is damaged.
• No electric
current is reaching
the appliance.
• Control system
has disabled lights
because one or both
doors were left open
too long.
• Control is in Sabbath
mode (Sb is dis-
played on control).
17
COMMON SOLUTION
• This condition can force the cabinet out
of square and misalign the door. Refer to
"Leveling" in First Steps.
• Ensure floor can adequately support
freezer. Level the floor by using wood or
metal shims under the appliance or brace
floor supporting the appliance.
• Follow directions in "Interior Light" in the
Optional Features section.
• See "Appliance does not run" in Before You Call.
• Close and reopen door(s) to enable lights.
• Depress MODE key and CONTROL LOCK
key for 3 seconds.