Solar + LED Floodlight
BASIC OPERATION (CONTINUED)
Constant Lighting Mode
Press the On/Off button located on the light 1 time or press the Constant Lighting Mode
button of the remote.
Default setting: The Light will automatically turn on at night and maintain 60% brightness for 4
hours. After this, it will switch over to the default Sensor Mode (see next section).
Sensor Mode
Press the On/Off button located on the light 2 times or press the Sensor Mode
remote.
Default setting: The Light will automatically turn on at night with 100% full brightness when
motion is detected. After 20 seconds of no movement, the light will dim to 30% brightness.
Notes:
•
These are the basic factory default settings. The user can customize the brightness and
operation time by following the instructions in the Advanced Operation section of this
manual.
4
4800 by Wagan Tech
™
After 4 hours working
www.wagan.com
®
120°
button on the