Wagan Tech 8592 Manual De Usuario página 7

Curved Pole:
1. Remove the metal mounting bracket (it will not be used for this installation type).
2. Loosen the bottom screws until opening is wide enough for the pole.
3. Mount light on 50 mm (2") diameter pole.
4. Tighten the four bottom screws to secure the light to the pole.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User's Manual—Read before using this equipment
1
3
Ø50MM
©2020 Wagan Corporation. All Rights Reserved.
2
Loosen these screws.
4
Tighten these screws.
7