DISPLAY AND CONTROL PANEL
Time Remaining button
5
You can use this auxiliary function to delay the start time of the washing cycle for 1 to
23 hours .
To use the delay function:
Press the delay key once.
"01" will be displayed. will light up on the electronic display
Press the delay key until you reach the time after which you want the machine to start
the washing cycle.
If you have skipped the delay time you would like to set, you can keep pressing the
delay key until you reach that time again.
To use the time delay function, you need to press the Start/Pause key to start the
machine.
If you want to cancel the delay:
- If you have pressed the Start/Pause key to start the machine, you just need to press
the delay key once
- If you have not pressed the Start/ Pause key, press the delay key continuously until
NOTE: In the case that you want to select the auxiliary function feature, if the auxiliary
function LED is not on, this means that this feature is not being used in the washing
programme you have selected.
Start/Pause button
6
By pressing on the Start/Pause button, you may start the programme you have
selected or suspend a running programme. If you switch your machine to the standby
mode, the Start/Pause led on the electronic display will blink.
Child Lock
4+5
The Child Lock function allows you to lock the buttons so that the wash cycle you
have chosen cannot be changed unintentionally. To activate child lock, press and hold
button 4 and 5 simultaneously for at least 3 seconds. ''CL'' will flash on the electronic
display for 2 seconds when the child lock is activated. If any button is pressed or
selected programme is changed by the programme dial while the child lock is active,
the "CL" symbol will flash on the electronic display for 2 seconds. If the child lock
function is active and a programme is running, when the programme dial is turned
to the CANCEL position and another programme is selected the previously selected
programme continues from where it was left. To deactivate the child lock, press and
hold button 4 and 5 simultaneously for at least 3 seconds until the "CL" symbol on the
electronic display disappears.
88
will go off on the electronic display.
goes off on the electronic display
will go off on the electronic display.