Emptying The Dust Tank; Cleaning And Maintenance; Technical Specifications - cecotec Conga Immortal ExtremeSuction 22,2V/Animal Hand Manual De Instrucciones

EMPTYING THE DUST TANK

• Remove the whole dust tank by pressing the release button and taking it out.
• Take out the filters and the plastic protector and empty the contents of the dust tank. The
filter can be shaken clean or cleaned and rinsed with warm water (no detergents). Make
sure all the parts are completely dry before reinstalling them).
• Wash and rinse the tank if necessary.
• Place the tank back into its position. A click will be heard, indicating it is properly fixed.
Note: make sure all the parts are dry before place them back in their position.
• Place the filter in the dust tank. Assemble the dust tank in the motor unit following the
opposite procedures as for detaching the dust tank.
Dust tank

5. CLEANING AND MAINTENANCE

1. Use a soft, dampened and clean cloth to clean the product's outer housing.
2. Wash the dust tank under water and dry it off thoroughly before placing it back in the
vacuum cleaner.
3. Check the filter regularly. If it is dirty, clean it with a small brush and rinse it in water. Allow
it to dry in open air for 24 hours and reinsert it when it is fully dry.

6. TECHNICAL SPECIFICATIONS

Model: Conga Immortal ExtremeSuction 22,2 V |
Conga Immortal ExtremeSuction 22,2 V Animal Hand
Product reference: 05440 |05441
Battery: 22,2 V, 2200 mAh
Power supply: 100-240 V ~ 50/60 Hz
Made in China | Designed in Spain
HEPA
Plastic cover
CONGA IMMORTAL EXTREMESUCTION 22,2 V
ENGLISH
15