Before Use; Product Assembly - cecotec Conga ThunderBrush 850 Manual De Instrucciones

3. BEFORE USE

• Take the product out of the box.
• Clean the outside and inside of the machine with a damp
cloth and wipe dry.
• Check for any visible damage, if any is observed, contact as
soon as possible the Technical Support Service of Cecotec for
advice or reparation.
• Make sure the battery is inserted in the product's main body
before operating.

PRODUCT ASSEMBLY

Aluminium hose installation
1. Insert the aluminium hose's end into the appliance's main body. Make sure a click is heard
indicating it is properly fixed in its place.
2. Hold the aluminium hose while you press the hose release buttons (one on each side)
with one hand and pull from the product's main body with the other hand in order to
remove it.
Aspiration base installation
1. Insert the aluminium hose's end into the aspiration base. Make sure a click is heard
indicating it is properly fixed in its place.
2. Hold the aspiration base while you press the hose release buttons (one on each side) with
one hand and pull from the aluminium hose with the other hand in order to remove it.
05122_ThunderBrush 850_MV.indd 13
CONGA THUNDERBRUSH 850 IMMORTAL BATTERY 29.6 V
ENGLISH
13
26/7/18 0:53