Electric Connection - KEY 900PS-200 Manual De Instrucciones

MANUAL RUN
In case you need to operate manual on the wing, proceed as follows
1) Switch off the supply
2) Insert the unlock key you've found with the motor and turn it 360° ( picture 10 )
move the arm on the point indicated on the picture ( point H ) In this way you
unlock the internal reduction system, in order to allow you the emergency manoeuvre.
3) In order to re-insert the trasmission you need to turn the unlock key on the start
position,and take it off, so the rotation system of the gear motor will be re-loocked.
4) Now you can re-establish supply and check that everything works correctly.
5) Remember to take off the unlook key and put it in a safe place
360°

ELECTRIC CONNECTION

+
Encoder
POINT H
Fig. 10
-
8 7 7
Instalar os batentes de paragem
Fig. 3
POSICION BRIDA ANTERIOR
ANGULO DE ABERTURA
6 11 6 11
E