CBX ELSU Manual Del Usuario página 7

Insert the front leg with wheels into the front leg tube.
1
CHECK to make sure front tube is attached by pulling it.
Insert the rear leg into the rear leg tube.
2
CHECK to make sure rear tube is attached by pulling it.
To open the highchair, pull up on the back of seat and rotate it all the way back until it clicks into
3-5
the open position.
CHECK to make sure the highchair is securely locked into position on both sides. Press down on
both tray arms to make sure the frame is securely locked into position.
To attach footrest, insert footrest into the tubes on the front of the highchair.
6
WARNING: Keep childs fingers and hands clear when adjusting the tray position.
7
To attach tray, slide tray into the channels on each side of the highchair until it locks into one of
the 3 tray positions.
To adjust tray, squeeze buttons on both sides of tray and slide tray into one of the three tray
8
positions.
WARNING: PREVENT SERIOUS INJURY OR DEATH FROM FALLS OR SLIDING OUT.
9
Always secure child in the restraint.
To attach the harness and waist straps to the crotch buckle, hook shoulder straps A onto the waist
buckles B, then click the waist straps into the crotch buckle.
To unlock harness, squeeze the buttons on the crotch buckle and pull harness straps off child.
10
To adjust harness around your child, tighten shoulder and waist straps by sliding the adjusters to
11
loosen or tighten.
For ease of folding, tilt highchair back to lift up the front legs, then pull up on levers on both sides
12
of the highchair.
Rotate seat forward.
13
Selfstanding when folded.
14
Important — Keep these instructions for future reference.
Warnings, safety instructions, maintenance, disposal and guarantee can be found in the warnings
booklet.
INSTRUCTIONS
DE
EN
7