Handling Compact Discs; Specifications - Yamaha MCR-040 Manual De Instrucciones

• Always handle with care so that the playing surface is
not scratched. Do not bend discs.
• To keep the playing surface clean, wipe with a clean,
dry cloth. Do not use any type of disc cleaner, spray, or
any other chemical-based liquid.
• Do not expose discs to direct sunlight, high temperature
or high humidity for a long time.
■ CD RECEIVER (CRX-040, CRX-140)
PLAYER SECTION
iPod
• Supported iPod ...... iPod (5th generation), iPod classic, iPod nano,
iPod touch
CD
• Media ......................................................................CD, CD-R/RW
• Audio format .............................................Audio CD, MP3, WMA
LASER
• Type ....................................... Semiconductor laser GaAs/GaAlAs
• Wave length ........................................................................ 780 nm
• Output power....................................................................... 10 mW
USB
• Audio format ............................................................... MP3, WMA
PORTABLE
• Input connector........... STEREO L/R: 3.5 mm STEREO mini Jack
AMPLIFIER SECTION
• Maximum output power............................................ 15 W + 15 W
• Input sensitivity
PORTABLE ............................................................ 450 mV/22 kΩ
• Total harmonic distortion
CD etc. 1 kHz/1W ................................................................ 0.05 %
TUNER SECTION
• Tuning range
[U.S.A. and Canada models].......................... 87.5 to 107.9 MHz
[Other models] ........................................... 87.50 to 108.00 MHz
GENERAL
• Power supply
[Europe model] ................................................ AC 230 V, 50 Hz
[U.S.A. and Canada models]............................ AC 120 V, 60 Hz
[Asia model]..................................AC 220/230-240 V, 50/60 Hz
[Taiwan model] ......................................... AC 110/120 V, 60 Hz
[Australia model] ............................................. AC 240 V, 50 Hz
[U.K. model] .................................................... AC 230 V, 50 Hz
[China model] .................................................. AC 220 V, 50 Hz
[Korea model] .................................................. AC 220 V, 60 Hz
• Power consumption................................................................ 25 W
20
En

HANDLING COMPACT DISCS

SPECIFICATIONS

(6 Ω 1 kHz, 10% THD)
• Do not wipe with a circular motion; wipe straight
outward from the center.
• Use a soft-tipped pen when writing on the label side of a
disc.
• Standby power consumption
MCR-040 .................................................................0.5 W or less
MCR-140
POWER SAVING: ECO ......................................1.0 W or less
POWER SAVING: NORMAL (default setting)
..............................................................................2.0 W or less
• Dimensions (W × H × D) .............................. 180 × 120 × 309 mm
• Weight ...................................................................................3.6 kg
■ SPEAKER (NS-BP80)
• Driver unit ...........................................10 cm full-range Cone type
• Dimensions (W × H × D) .............................. 122 × 118 × 287 mm
• Weight ...................................................................................1.4 kg
■ TRANSMITTER (YIT-W11TX)
• Frequency .......................................................................... 2.4 GHz
• Transmission range................................................... Approx. 10 m
• Number of units which can be simultaneously transmitted to
............................. Up to 7 units (depending on the circumstances)
The rating marking of "5 V
charge to iPod.
Specifications are subject to change without notice.
iPod™
iPod is a trademark of Apple Inc., registered in the U.S. and other
countries.
"Made for iPod" means that an electronic accessory has been
designed to connect specifically to iPod and has been certified by
the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
/Non Magnetic Shielding Type
(without interference)
1.0 A" is marking for the