Battery Replacement
1. Twist the backside of the lantern to the "OPEN" position to open the lid.
2. Insert 3x AA size batteries according to the correct polarity as shown on the lantern.
3. Put the lid back on the torch and twist it to the "LOCK" position to close it.
4. The lantern is ready to use.
Precautions
• To maintain the best efficiency of the solar panel, avoid it from being damaged and/or dirty
on the outside.
• To quickly recharge the battery, place the lantern in direct sunlight as shown in the picture.
• Get the lantern recharged after each use. For long-term storage, make sure the product is
exposed to sunlight for at least 24 hours every 3 months.
• Remove the batteries during long storage periods.
Safety precautions:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
problem should occur. Do not expose the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or
damage caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their
respective holders and are hereby recognized as such.
Keep this manual for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic
products should not be mixed with general household waste. There is a separate
collections system for these products.
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician when service is required.
Disconnect the product from mains and other equipment if a
3