Dust Extraction; Working With The Machine; Service And Maintenance; Vanes - Festool LRS 93 M Manual De Instrucciones

Dust extraction

WARNING
Dust hazard

Dust can be hazardous to health. Always work
with a dust extractor.

Always read applicable national regulations be-
fore extracting hazardous dust.
Please observe all mentioned safety infor-
mations and the following rules when work-
ing:
– Always secure the workpiece in such a manner
WARNING
Risk of injury

The machine should always be disconnected
from the compresses air supply before any work
is carried out on the machine.

All maintenance and repair work which requires
the motor casing to be opened may only be car-
ried out by an authorised service centre.
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at:
www.festoolusa.com/service
EKAT
4 Use only original Festool spare parts!
Order No. at:
5
3
2
www.festoolusa.com/service
1
We recommend that the vanes on the motor be re-
placed after approx. 500 operating hours.
10

Working with the machine

Service and maintenance

Vanes

To guarantee optimal dust extraction, we recom-
mend using Festool extractors with automatic
switch-on/switch-off device for compressed air
machines.
In order to prevent damage to the pneumatic
motor, dust extraction must not be carried
out on the pneumatic tool when it is at stand-
still.
that it cannot move while being processed.
For work that generates dust, wear a dust
mask.

Lubrication

If the tool is not used for longer periods, e.g. for a
weekend, introduce 1 or 2 drops of lubricating oil
into the compressed-air supply [5-1] on the tool
prior to use.
 Use only the recommended Festool oil (Safety
Data Sheet for professio.nal users available on
request)
5

Replacing the silencer

In order to maintain the power and performance of
the compressed air tool, replace the silencer on the
IAS hose systems at regular intervals.
5-1