Hold Function - Sola ENW Instrucciones De Uso

8.3. Hold function

By pressing the "Hold/Copy" button once, the current angle is frozen. If the acoustic signal is
active, the sound is different depending on the position (right or left) in which the spirit level is
in from the frozen angle.
8.4. Reference angle - alternative 0
In order to set a reference angle, the "Hold/Copy" button is pressed in order to freeze the angle.
By pressing the "Cal/Alt0" button, the new reference position or the alternative 0 is set.
The function is identified in that a point appears on the display next to the right arrow.
By turning off the angle module or by pressing the "Cal/Alt0" button, the function is exited.
8.5. Copy or save angle
In order to copy or save an angle, the spirit level must be brought into the angle to be saved.
After this, press the "Hold/Copy" button to freeze the angle and turn on the acoustic signal by
pressing the speaker button.
A long lasting sound will ring and the speaker symbol and a point below this will begin to blink.
The angle is still frozen in the display.
Now the spirit level can be moved and brought to the desired location.
The angle to be copied is found by following the acoustic signals. The closer the position of the
spirit level gets to the copied angle, the higher the frequency of the tone.
20