First Steps; Inserting/Replacing The Batteries - Dörr ZB-200 PV Manual De Instrucciones

04 | NOMENCLATURE
01 Lens
02 Infrared illumination
03 On/Off button
04 Button video mode/recording
05
Button brightness
06 IR Button infrared illumination
07 Button photo mode/releasing
08 Button zoom
09 micro SD card slot
09a) Rubber cover
10 Eyelets for neck strap
11 LCD display
12 Focussing wheel
13 Battery compartment cover
14 Battery compartment cover lock
15 ¼ Inch tripod socket
16 Battery compartment
16a) Contacts
16b) Strap for pulling out the battery holder
17 Battery holder for 4 batteries
17a) Battery contact

05 | FIRST STEPS

05.1 Inserting/replacing the batteries

Slide the two battery compartment cover locks (14) to the position with the open lock
Remove the battery compartments covers (13). Pull the straps (16b) to remove the battery
holders (17). Insert each 4 pcs Alkaline batteries, type Mignon AA LR6 1.5V (optional) into
both battery holders (17) - make sure that the polarity is correct when inserting the
batteries (+/- markings on the bottom of the battery holder).
Insert the battery holders (17) back into the battery compartments (16) - make sure that the
battery contact (17a) points in the direction of the arrow (marking on the battery holder)
to the contacts (16a) in the battery compartment (16).
Put on the battery compartment covers (13) and set the two battery compartment cover
locks (14) to the position with the closed lock
12
.
doerr-outdoor.de