Korg SQ-64 Manual Del Usuario página 20

SQ-64 Owner's Manual
Pad position Global parameter name
B-15 USB BUS POWER
C-10 MIDI THRU
■ When the TRACK button [A] to [C] is pressed
Pad position Global parameter name
A-5 GATE CV
A-6 PITCH CV
A-7 MOD CV
A-9 MIDI RX
A-10 MIDI TX
* V-TRIG, or voltage trigger, means the signal will be high when active and low when inactive. S-TRIG, or switch trigger, means the signal will be low when active and high when inactive.
PARAM knob Value (initial value is in boldface)
PARAM3 MIDI1 OFF, MIDI1 ON
PARAM4 MIDI2 OFF, MIDI2 ON
PARAM1 500mA, 2A
OFF, ON
PARAM1
PARAM knob Value (initial value is in boldface)
PARAM1 V-TRIG, S-TRIG*
5V, 10V
PARAM2
PARAM1 Hz/V, 0.26V/oct, 0.32V/oct, 1V/oct, 1.2V/oct
PARAM2 -1.00V - +1.00V (0V) *0.01V increment
PARAM3 0V : 0 - 127 (C3) * display as "note name"
TEST OUT OFF, TEST OUT 0-127 * display note
PARAM4
names
PARAM1 0.00V - 10.00V (5V)
PARAM2 -1.00V - +1.00V (0V) *0.01V increment
TEST OUT OFF, TEST OUT 0-127
PARAM4
PARAM1 CH1 - CH16 (A: CH1, B: CH2, C: CH3)
PARAM2 USB OFF, USB ON
MIDI OFF, MIDI ON
PARAM3
CH1 - CH16 (A: CH1, B: CH2, C: CH3)
PARAM1
PARAM2 USB OFF, USB ON
PARAM3 MIDI1 OFF, MIDI1 ON
PARAM4 MIDI2 OFF, MIDI2 ON
Parameter details, remarks
Enable/disable transmission of MIDI transport messages to MIDI1 output.
Enable/disable transmission of MIDI transport messages to MIDI2 output.
When connecting to a USB 2.0 compliant port, set to "500mA".
Enable/disable MIDI THRU behavior for MIDI2 output. When enabled, the MIDI2 output
becomes a dedicated MIDI THRU port, only relaying all messages received on the MIDI input.
Parameter details, remarks
Set the polarity of the gate output.
Set the voltage range for the gate output.
Set the pitch CV output mode.
Set a voltage bias on the pitch CV output.
Set the reference note for 0V
Enable/disable a test signal on the pitch CV output. When enabled the voltage
corresponding to the specified note will be set on the pitch CV output.
Set the voltage range for the mod CV output.
Set a voltage bias on the mod CV output.
Enable/disable a test signal on the mod CV output. When enabled the voltage
corresponding to the specified value will be set on the mod CV output.
Set channel on which MIDI messages will be received.
Enable/disable reception of MIDI messages from USB-MIDI.
Enable/disable reception of MIDI messages from MIDI input.
Set channel on which MIDI messages will be transmitted.
Enable/disable transmission of MIDI messages to USB-MIDI.
Enable/disable transmission of MIDI messages to MIDI1 output.
Enable/disable transmission of MIDI messages to MIDI2 output.
20