ASPIRAPOLVERE WET&DRY
12
• Make sure that the ventilation slits are never obstructed. A blocked ventilation
circuit can result in overheating and damage to the appliance.
• This product contains rechargeable batteries. Do not throw the batteries into
fire and do not subject them to high temperatures. There is a risk of explosion!
• Do not use the handheld vacuum cleaner without the dust filter.
• Do not use the mains adapter for a different product and do not attempt to
charge this appliance with a different mains adapter. Use only the mains adap-
ter supplied with this appliance.
• Never attempt to recharge non-rechargeable batteries.
• The batteries in this appliance cannot be replaced.
BEFORE FIRST USE
Remove all packaging materials from the appliance.
Press the dust filter bag and the dust filter a little way into the dirt container.
They might have worked loose during transport and thus not be positioned
correctly inside the dirt container.
Place the dirt container on the motor unit:
– Push the plastic tab on the underside of the handheld vacuum cleaner into
the recess on the dirt container.
– Press the release button and push the dirt container onto the motor unit at
the same time.
– Let go of the release button so that the restraint engages in the recess.
The dirt container is now firmly seated on the motor unit.
This handheld vacuum cleaner is powered by rechargeable lithium-ion batte-
ries.
For care of the batteries, we recommend the following: Once the batteries
have been charged, disconnect the mains adapter from the mains socket.
Do not reconnect the mains adapter with the mains socket until the handheld
vacuum cleaners suction power has noticeably decreased.
INSTALLATION OF THE WALL BRACKET
DANGER – ELECTRIC SHOCK!
• Ensure that there are no power cables or other conduits or pipes in the wall
at the location where you intend to bore the holes for the wall bracket. Drilling
into a current-carrying electric cable can be potentially fatal!
1) Place the barrel plug of the mains adapter into the wall bracket as shown in
the diagram. Secure the barrel plug by turning it.
2) Select a suitable installation location for the wall bracket: It must be possible
to remove the handheld vacuum cleaner easily and there must be an accessi-