Warranty Policy - Dynafit BEAST CARBON Instrucciones De Uso

the boot (4). Just a bid before the countdown is finishing, take out the first boot and leave
the second one on the machine. Place the footbed (if needed) back into the boot before
stepping in. Place your foot into the boot helping you with a shoehorn. Close the boot into
downhill mode to a level of medium tightness. Remain in a stable standing position and
wait at least 10 minutes to allow the liner to cool down and walking on the heels in the first
10 seconds. Repeat these points for the second boot. External abrasion on thermoformable
liners is normal. In the boot box, special patches are provided to reinforce your liners if you
start to see abrasion occurring on the outside of the liners.
CARE AND MAINTENANCE OF YOUR DYNAFIT BOOTS:
• Use only mild soap and water to clean your boots.
• If the liners are wet, remove them from the shells. Take out the footbeds and place them
in a warm, dry place. Keep them away from direct heat sources, such as radiators, fire-
places, or ovens, as this may cause damage or change the fit.
• Before storing your boots, make sure that the liners and shells are dry. Fit the liners into
the shells, lightly close buckles and then store boots in a dark, dry place, away from any
sources of direct heat. Ideally, store your boots in the original box, or a box whose internal
surface is white, in order to prevent the lignin contained in the card from transferring to
the shell. This is especially necessary if the boots are white or light-coloured.
• With time and sun exposure, the coloration of the boots may change. Especially the white
color could become less bright. To preserve the color of your boots we suggest that you
store them in their box or in a place protected from direct sunlight.
• After some time the boots made in Pebax
sidered normal, due to the kind of material. this film could be removed with a wet rag.
® can present a white film, it has to be con-

WARRANTY POLICY:

DYNAFIT guarantees its boots against manufacturer and material defects for (1) one year
from the date of purchase. DYNAFIT does not recognize any other expressed or implied
warranties. Under specified circumstances, DYNAFIT will replace or repair the product
at their sole discretion. The buyer should return the clean and dry boots to the place of
purchase with proof of purchase. The warranty will be recognized only for boots used in
normal conditions and will not cover any damages resulting from normal wear and abrasion
(i.e. on the outsole), misuse, disassembly, or product alteration.
LIMITATION OF THE WARRANTY:
In no event will DYNAFIT be considered responsible for any direct or indirect damages per-
taining to the use of the boots including loss of boots, compromising external properties, or
any other economic loss. Some States do not allow warranty duration limitation or exclusion
of direct or indirect damages so the above limitation may not apply to you.
1) 2) 3) 4)