FOCO SLIM IDRO 16 Manual De Uso página 54

The thermostove boils
under "modulation"
that reaches the
temperature set on
the thermostat of the
thermostove
The thermostove goes
into "modulation"
as it reaches the
temperature set on
the thermostat of the
thermostove even at
low temperatures of
the water in the boiler
Never turn off the heater by removing electricity.
Let always complete the shutdown cycle, otherwise you may damage the structure and have
trouble lighting in the future.
54
1. It 'been set to a value of
thermostat too high
2. It was set too much power to
the implant.
1. Modify the parameter for the
maximum smoke temperature
modulation to edit
2. Dirty stove: the fumes are too
high temperature.
1. Lower the temperature in the boiler
2. Reduce the value of operating power
1. Contact your Authorized Assistance Center
2. Clean the tube bundle