Descargar Imprimir esta página

Mounting Instructions - Prilux Diane Tech Switch Instrucciones De Montaje

Publicidad

Diane Tech Switch
EMPOTRAR
Embed 60x60
DEGREE OF PROTECTION
Degree of waterlightness
PRECAUTIONS::
• Read this manual before installing the product, if in doubt consult qualified
personnel.
• If the product is damaged, replace it immediately with a new one.
• Turn off the power before installing the product.
• Keep the product out of the reach of small children.
• Do not handle the product while it is in operation and let it cool before
touching it with your hands.
• Do not install the product where there are sources of heat or humidity
concentrations.
• This device must be used with its specified driver.
• Not valid for use in bathrooms.
• For indoor use only.

MOUNTING INSTRUCTIONS:

EMBED:
1. Remove the false ceiling where you want to place the luminaire.
2. Select the color temperature option before connecting the luminaire to
the current.
3. Connect the luminaire to the driver using the quick connector.
4. Connect the general power cable to the driver (see diagram).
5. Place the luminaire in position.
6. Turn on the power.
DISCONTINUED:
1. Drill the holes in the ceiling to put the dowels. Consider the distance whe-
re the suspensions will be placed.
2. Screw part A of the suspension piece to the studs. And then screw part B
to part A of the suspension.
3. Hook the suspensions to the luminaire.
1/4
noviembre 2019
575 X 575mm
595
IP20
[GRÁFICOS: Unidades en mm/ GRAPHICS: Units in mm/GRAPHIQUES: Unités en mm/GRÁFICOS: Unidades em mm]
WARNING
BEFORE INSTALLING THIS PRODUCT, PLEASE READ THE
INSTRUCTIONS CAREFULLY AND STORE THEM IN A
SAFE PLACE.
THE INSTALLATION SHOULD BE CARRIED OUT BY
TRAINED STAFF.
INCORRECT HANDLING OF THE PARTS OR THE
LIGHT FIXTURE ITSELF MAY IMPAIR THE PROPER
PERFORMANCE OF THIS PRODUCT. IN THIS CASE,
THE MANUFACTURER GUARANTEE SHALL BE DEEMED
VOID.
THE MANUFACTURER GUARANTEE SHALL BE DEEMED
VOID: IF THE INSTALLATION IS NOT PERFORMED IN
ACCORDANCE WITH THE SPANISH LOW VOLTAGE
ELECTROTECHNICAL REGULATION 2002 (REBT 2002).
THE APPLICATION OF IBC BT09-4 OF REBT (INSTALLATION
OF LINE AND LIGHT FIXTURE SURGE PROTECTORS) IS
ESSENTIAL FOR INDUSTRIAL AND PUBLIC LIGHTING
INSTALLATIONS. THE GUARANTEE DOES NOT COVER
AGAINST DAMAGES CAUSED BY SURGES IN LIGHT
FIXTURES WITHOUT SURGE PROTECTORS INSTALLED.
ATTENTION!!!
OBSERVE
PRECAUTIONS
HANDLING
SENSITIVE DEVICES.
FOR
ELECTROSTATIC

Publicidad

loading