Phonic PAA6 Manual Del Usuario página 15

● To refresh the maximum SPL display, simply push the word "Max" on screen (figure 12).
● Pushing the Run/Stop and Signal Generator (S.G.) buttons on the left of the PAA6 may be quicker
than pushing the onscreen icons.
● The PAA6 cannot be charged through the USB connector. To charge the unit, the provided DC
power adapter needs to be connected to the PAA6.
● When the PAA6 is off and charging, the power LED will flash. This LED will stop flashing when the
battery is fully charged.
● When the PAA6 is connected to the computer via USB, users are still able to recall saved files from
the SD card. They will not, however, be able to save and delete files until the PAA6 is disconnected
from the computer.
PAA6
figure 12
15