Ondal Acrobat 2000 Instrucciones De Montaje página 14

1 Your safety is important to us
1.3 Important safety information
WARNING – Electric shock hazard:

Remove plug
adjustments

When the plug
protective cap
- Take precautions to prevent the plug
again unintentionally.
- Do not remove the protective cap
arm.
- Insert plug
You can order a
Customer Service Centre.

Only mount the wall bracket at a place where the appliance,
mounted on the wall arm, does not come into contact with a
tub, washbasin or shower.

The applicable regional building provisions must be observed.

The wall bracket type WL04 power supply may only be a
properly earthed socket outlet with earthing contact.
WARNING – Sudden drop of wall arm:
In order for the wall arm to bear its own weight and the dynamic
loads, the following points must be observed:

Only fixtures approved by the building authorities may be used.

The applicable regional building provisions must be observed.

For the sake of strength no plastic dowels may be used.

The fixture manufacturer's directions must be followed.
- The minimum anchorage depth must be observed. Insulation,
tiles, plaster etc. do not count towards the anchorage depth.

For lightweight partition walls, we recommend fixture with an
optional back plate
CAUTION – Damage to property:

Prevent the appliance from colliding with walls or nearby
objects. An optional wall arm stop
supply) can be mountedon the wall bracket by a specialist
(electrician, technical expert) or staff with a comparable
qualification.
KEEP THIS SAFETY INFORMATION FOR FUTURE REFERENCE.
14
during all installation, dismantling, repairs and
is inserted, the plug connection under the
is live.
from being plugged in
until mounting the wall
only once installation is completely finished.
protective cap for unused spigots from your
(not included in scope of supply).
(not included in scope of
GB
D
D
D