KIKKA BOO ALLURE Instrucciones De Uso página 6

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 11
HOW TO OPEN THE STROLLER ( fig.1, fig.2)
Move the closing lever "a": as shown in the figure (fig.1 ). Lift the handlebar until the chassis opens completely. A click will indicate that is has been
fastened. Before using the stroller, make sure it is opened properly and the mechanisms are properly locked (fig.2).
FITTING THE REAR WHEELS (fig.3,fig.4, fig.5, fig.6)
Place the rear wheel unit on the frame, until it is completely locked on. Ensure, from both sides of the chassis, that the wheel unit is locked on correctly.
The wheel support is properly assembled when the metal pins lock in the holes on the frame pipes (fig.4). Fit the rear wheels on the axis in the direction
shown by the arrow. Press button "A" while pulling the wheel to remove it from the axis (fig.6).
ADJUSTING THE SHOCK ABSORBER, REAR WHEELS (fig.7)
For softer suspension, move lever "A" towards the back. For harder suspension, move lever "A'' towards the front. Make sure that lever "A'' is adjusted to
the same position on both sides.
FITTING THE FRONT WHEELS (fig.8, fig.9, fig.10)
Place the wheel pin inside the bushing in the centre of the wheel support. Press button "A" down to disable the swivelling movement. Press button "A"
again (button will pop up) to activate the swivelling movement. Press button "B" on the external side to remove the wheels.
STROLLER CONFIGURATION
STROLLER VERSION SEAT (fig. 11, fig.12,fig.13)
Make sure the automatic buttons or velcro ( depending on the version you have purchased) are properly fastened, as shown in the figure. The fabric
must envelop the metal bracket. Fasten belt "A" and belt "B" on the lower part of the footrest. To lift the backrest, hold adjuster strap "C" with one hand
and, with the other, slide adjuster device "D" towards the backrest. To recline the backrest, press the button in the middle of adjuster device "D" and
slide it downward.
FITTING THE SEAT (fig.14, fig.15)
Line up the seat connectors with their adapters and press downwards. A click will indicate proper fastening. Before use, always make sure the accessory
is completely fastened on both sides. When the seat is lifted upwards, it must not detach. Lift lever "A" on the adapter on both sides to remove the seat
from the chassis (fig.15).
REVERSIBLE SEAT (fig.15, fig.16, fig.17)
Lift lever "A'' on both sides and remove the seat. Position the seat facing forward or facing the parent. Put the seat back on the stroller chassis, see
"fitting the seat" for proper assembly.
FITTING THE BUMPER BAR (fig.18, fig.19, fig.20)
Assembly: align the bumper bar and insert it in place on both sides, you will hear a click when it is locked correctly.
Disassembly: press button "A" on both ends of the bumper bar and pull it outwards at the same time, to remove it. To open it on one side only: press
button A on one side of the bumper bar and pull to open it like a gate.
FITTING THE CANOPY (fig.21, fig.22)
Assembly: Insert the plastic clips inside the respective guides located on both sides of the stroller. You will hear a click when they are locked correctly in
place. Secure on the side with the ZIP. Disassembly: Open the ZIP on the side, press button "A'' and lift to remove the canopy.
FITTING THE FOOTMUFF (fig. 23) Secure the ZIP on the side, attach the velcro as shown in the figure.
ADJUSTING THE SEAT ( g.24)
The seat can be adjusted in di erent positions. Lift adjustment lever "A" located on the back of the backrest and recline the seat to the
desired position. Release the lever and make sure it locks properly.
SAFETY HARNESS ( g.25)
Put the brakes on before sitting your child in the stroller. Releasing the buckle: Press button "A" and pull out the parts. Place your child in
the stroller and adjust the harness to t him/her. Fastening the buckle: Insert part "a" in part " b': a click will indicate proper fastening.
Always fasten the restraint system properly.
ADJUSTING THE FOOTREST ( g.26) Press buttons "A" and adjust the footrest to the desired position.
ADJUSTING THE CANOPY ( g.27)
Unfold the canopy as needed to protect your child from the sun.
Warning: children have sensitive skin, NEVER leave your child directly exposed to the sun, always ensure the canopy is adjusted correctly.
ENGLISH

Publicidad

Tabla de contenido
loading

Tabla de contenido