WARNING – RISK OF INJURY!
►
Never attempt to remove food from the bowl 6 while the blade 7 is still
turning . There is a risk of injury and food can also spray out and make a mess .
10) Wait until the blade 7 has come to a complete standstill .
11) Lift the motor unit 2 off the lid flange 3 .
12) Remove the lid 4 .
WARNING – RISK OF INJURY!
►
Handle the extremely sharp blade 7 with caution as it can cause injuries .
Keep the blade 7 out of the reach of children .
13) Pull the blade holder 5 with the blade 7 carefully out of the bowl 6 .
14) Remove the food .
NOTES
►
Chopping harder, abrasive foods can cause the bowl 6 to take on a dull
appearance . This is normal and will not impair the functioning of the appliance .
►
After you have finished processing the food, you can use the stand 9 as
a lid for the bowl 6 to keep the food fresh for longer .
–
–
–
SMZ 260 I2
Take the motor unit 2 and the lid 4 off the bowl 6 .
The blade holder 5 with the blade 7 can, if so desired, remain in
the bowl 6 .
Remove the stand 9 from the underside of the bowl 6 . You can now
place the stand 9 on the bowl 6 so that it closes off the bowl 6 .
GB │ IE
│
25
■