Pur Line HEATY EX2000 Manual De Usuario página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
EN
before taking any action.
· Do not operate this appliance if the cable or plug becomes damaged.
· Keep the appliance and cable away from sources of heat, sharp objects or
anything that may cause damage.
· If the cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
· Ensure the appliance is switched off before connecting to the mains power
supply.
· Switch off the power supply and disconnect from mains supply when not in
use, before cleaning or other maintenance.
· To disconnect the appliance, switch it "0", and then remove the plug from outlet.
Do not pull the cord to disconnect the plug.
· The heater must not be located immediately below a socket-outlet, or directly
under a shelter.
· Do not operate in areas where gasoline, paint or other flammable liquids are
used or stored.
· Do not leave this appliance unattended when it's in use.
· Do not place the heater on carpet, don't place the cable under carpets. Arrange
cord away from traffic areas so that it will not be tripped over.
· Do not use this heater in the immediate surroundings of a bath, a shower or a
swimming pool.
· Never operate your appliance if it has fallen over.
· Never dismantle your appliance. An incorrectly repaired appliance maybe
dangerous to the user. If you encounter any problems, please take it to one of
the Approved Service Centers in our customer service network. The warranty
will be void in the event of damage arising from improper use.
· This movable appliance is designed for use in gardens, and can be used indoor
and outdoor. The warranty will not apply to appliances used for professional
usage.
· The heater is provided with an anti-tilt switch will switch off the heater if it is
overturned, and will switch it on again automatically when it is restored to its
upright position.
· CAUTION: Before fitting or removing the appliance, ensure that the heater's
power line supplying the heater is disconnected. Check that the power line is
connected to a 30mA differential circuit breaker.
· The installation and use of your appliance must comply with the applicable
standards in your country.
· If you have any doubts concerning installation possibilities for this heater,
please consult a qualified electrician.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido