Incorrect Positioning; Removal Of Dags; Checks And Controls - Cascade DAGS Manual Del Usuario

Incorrect Positioning

NO
Fork Tips
NO
!
6827709 EN
DAGS
Fork Tips
DAGS

Removal of DAGS

Wear suitable protective gloves
bracelets, etc., because they will be attracted to the magnetic field generated
by the magnets on the bottom side of the DAGS.
posterior corner and lift the device upwards.

Checks and Controls

Check the top surface of the DAGS on a regular basis, when the rubber sur-
face is torn, the DAGS loses its anti-scratch characteristics.
!
FK0153.eps
DAGS
NO
DAGS
DAGS
NO
DAGS
and do not wear metal-based necklaces,
During removal of the DAGS, be careful not to place your
fingers between the fork surface and the DAGS. DUE TO RISK
OF CRUSHING BETWEEN THE SURFACES.
CAUTION: Magnetic field.
Always check and test the magnetic layer of the DAGS and the
strength of adhesion to the metal surface. Remove any foreign
material that can adhere to the magnetic layer.
Fork
Fork
FK0152.eps
To remove the DAGS, grip a
4