SystemAir KVB Manual De Instrucciones página 5

GB
KVB / KVD / KPB / KPD / mVent / mVec
G
eneral rules reGardinG the electric
supply to the product
According to the safety rules, products using electricity must be connected
to an efficient ground electric gateaway. In case of doubt ask for a deep
electric installation check and be sure that it is carried out by a qualified
person. the manufacturer of this product will not accept any claim for
damages caused by the lack of a ground wire in the installation.
check that the electric installation is the right one according to the maxi-
mum product electric input, and make sure that the wire section of the
installation is suitable for the product electric input.
According to the safety rules, an unipolar switch is required for connection
to the electric supply.
When using products consuming electric energy, it is obligatory to respect
the following fundamental rules:
• Do not touch the product when part of the body is humid or wet, or
when bare feet.
• Do not pull from the electric wires.
• Avoid the product exposure to atmospheric agents (snow, rain, sun, etc)
• Never allow the product manipulation by unqualified persons.
the person(s) installing this product must make sure that once it will be at
work, this complies with the following directives:
• Low Voltage Directive (2006/95/EC and CE/93/68).
• Machinery Directive (CE/98/37).
• Electromagnetic Compatibility Directive (2004/108/EC)
5