Technical Features - FTE Maximal HCA ZM 45-30 Manual De Usuario

Example of installation
- - - Return channel
RF
Chapter 2.

Technical Features

Ref.
Code
Nr. Inputs/ Outputs
Terr. Freq. Margin.
Terr. Gain.
Terr. Regulation
Fixed Terr. Regulation
Terr. Equalization
Fixed Terr. Equalization
Freq. Margin Return path
Return path Gain Active/Passive
Return path Gain Regulation
Fixed Return path Equalization
Output Level Max.
Protection grade
Consumption
Dimensions
Chapter 3. Conformity Declaration
If you wish a copy of the conformity declaration, please contact to the company
User's Guide · HCA ZM 45-30 / HCA ZM 45-65
Example of a building with two dwellings with 8 outlets per
The CATV signals are distributed in each outlet.
The amplifiers allow us to equalize the signal, and this way the power
difference between high and low signals can be avoided, therefore we
can reach an optimal signal level in each outlet
The amplifier allows us to configure the return path as active,
we would be able to use any multimedia service that the provider
could supply us. The return
on model HCA ZM 45-XX that we use.
CONFORMITY DECLARATION
"WE, FTE MAXIMAL, DECLARE THAT THE PRODUCTS
HCA ZM 45-30 AND HCA ZM 45-65,
ARE IN CONFORMITY WITH FOLLOWING DIRECTIVES
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC"
path can be 30MHz or 65MHz depending
HCA ZM 45-30 HCA ZM 45-65
0302430 0302465
1/1
47-862 MHz 85-862 MHz
42 +/- 1.5 dB
20 dB
0-6 dB
10 dB
0-6 dB
5-30 MHz 5-65 MHz
30 dB / >-2.5
20 dB
0-10 dB
124 dBμV
IP 65
230V 50Hz, 14.4 W
230 x 140 x 60 mm
- 4 - HCA ZM 45-30 / HCA ZM 45-65
dwelling.
this way
Version_en_1.1 FTE maximal