Technical Features - FTE Maximal HCA 42 P Manual De Usuario

Example of installation
In the example of installation show one building 7 floors and 2
apartments by floor where will be distributed terrestrial signal. In the
headend, the signals from the different aerials are amplified by the
programmable amplifier. The output is connected to the trunk to
distribute the terrestrial signals in the installation.
In an intermediate point of the trunk is required increase the level of
signal. The line amplifier HCA 42 P amplifies the level of the signal to
allow the signal reach the rest of installation optimally.
Capítulo 2.

Technical features

Ref.
Code
Nº Input
Nº Output
Frequency range
Gain
Gain ripple
Gain regulation
Equalization regulation
Fixed regulation
Fixed equalization
Máx. Output level (DIN 45004B IMA3 -60 dB)
Noise figure
Operative temperature
Power consumption
Dimensions
HCA 42 P
User's manual · HCA 42 P
230 Vac / 50-60 Hz / 13W
- 3 -
HCA 42 P
0300315
1
1 + 1 Test (--30 dB)
47 – 862 MHz
42 dB
±1 dB
18 dB
18 dB
0/3/6/9 dB
0/3/6/9 dB
129 dBµV
≤ 5 dB
-20ºC - 50ºC
213 x 140 x 78 mm
Versión_en_1.0 Fte maximal