Taurus SLIMLOOK KERATIN PRO Manual De Instrucciones página 19

- Do not use the appliance if the
cable or plug is damaged.
- Do not coil the mains cable
around the appliance.
- Do not allow the power
cable to hang off the table or
come into contact with the
appliance's hot surfaces.
- For extra protection we recom-
mend installing a residual di-
fferential current device (RDD)
not exceeding 30mA in the
electrical circuit supplying the
bathroom. Ask your installer
for advice.
- Do not touch the appliance
with wet hands when it is
plugged in.
- Before plugging the appliance
into the mains, make sure your
hands and the appliance are
completely dry.
- If any of the appliance's
covers break, immediately
unplug the appliance from the
mains supply to prevent the
possibility of being electrocu-
ted.
- WARNING: do not use the
appliance near water.
- Do not use or store the
appliance outdoors.
- For maximum efficiency, the
plates reach the temperature
used by professionals (220ºC).
Do not touch the plates or the
case covering them, as they
reach very high temperatures.
Be sure that the plates do not
touch your eyes or bare skin
while using the appliance.
- While operating, the plates
may reach temperatures of
up to 220ºC. The plastic parts
near the ceramic plates may
also be hot. We recommend
that you hold the appliance
with your hand in the tempera-
ture control zone.
- Never leave the appliance
outdoors and exposed to the
elements.
- Under no circumstances
should you use flammable
substances (gel, etc.) on your
hair before using the straighte-
ners.
- Never leave the appliance on
a wet surface or cloth while it
is plugged in.
- Do not leave the appliance
operating on surfaces that are
not heat resistant. Be sure
that the plates are cool before
placing the appliance on the
surface.
- Do not use the appliance if the
On/Off device is not working.
• Always unplug the appliance
after use and before removing
or installing parts and before
doing any maintenance or