Taurus SLIMLOOK KERATIN PRO Manual De Instrucciones página 21

STRAIGHTENER OPENING
AND CLOSING (FIG. 1)
- To close the straightener, close
the irons and press the open
and close control. The irons
will be locked in the closed
position. To open the irons,
slide the button the other way.
The irons will open.
OPERATION:
- Remove all elements from
the inside or outside of the
appliance used for protection
during transport or for sales
promotions, such as paper or
plastic bags, plastic sheets,
cardboard and stickers.
- Completely remove all the ele-
ments used for transportation
and packaging.
1. Place the straightener on a
flat, heat- resistant surface.
2. Plug it in.
3. Press the ON button (B), you
will hear a beep and the tem-
perature selector (C) will flash,
indicating that the straightner
is functioning (Fig 2) The de-
fault temperature is 180ºC
4. Select the ideal temperature
for your type of hair by pres-
sing the temperature selector
. It is advisable to use the
lowest heat settings for very
fine, dyed or damaged hair
and higher temperatures for
thick, curly and unmanageable
hair.
• With each touch of the tempe-
rature switch the temperature
gets progressively hotter 180-
200- 190- 210- 230ºC If you
want a lower temperature,
press the temperature selector
button - (D), the minimum
temp. for this hair iron is
110°C.
• While heating, an icon will
flash alongside the selected
position .
• When it reaches temperature
the said icon will stop flashing
and remain lit.
• The straightener will maintain
the preselected temperature
constant.
5. Create a straight or wavy
style.
6. Press the On/Off button when
you have finished using the
hair iron
7. Unplug the appliance from
the mains and wait until it has
cooled before storing.
8. Clean the appliance
STRAIGHTENING (FIG. 3)
1. Take a lock of hair (approxi-
mately 5 cm wide) and place
it between the plates. Close