Cleaning The Base Unit And The Suction Tube Line; Cleaning With The Rapid Clean™ Feature - Homeright PRO ELECTRIC C800804 Manual De Instrucciones

CLEANING THE BASE UNIT AND THE SUCTION TUBE LINE

1. Ensure that the unit is unplugged.
2. Release the Can Cover safety strap from the unit.
3. Remove the Can Cover from the paint can.
4. Remove the paint can from the unit. Dispose of paint properly in accordance to local ordinances.
5. Insert the Suction Tube into a bucket of warm soapy water.
6. Plug the unit into 3-blade grounded plug receptacle.
7. Turn the Variable Speed Dial to 9, the highest setting.
8. Depress the Clean/Paint switch to Paint setting. Ensure that the Suction Tube is submerged into the warm
soapy water.
9. Depress button on Handle to turn the unit on.
• NOTE: The Roller Frame must be in a 5 gallon bucked so paint and the water mixtures will not spray and
cause property damage. Do not submerge the Handle.
• WARNING: The base unit should be as far away from the sink or bucket as possible and kept in an upright
position.
10. Run unit until the inlet Hose is clean, the Hose will become clear when clean. The run time might take
between 1-3 minutes.
11. Depress button on Handle to turn the unit off.
12. Unplug unit from a 3-blade grounded plug receptacle.
m WARNING -
To avoid risk of electrical shock never use the Rapid Clean feature while the unit is plugged
into a 3-blade grounded plug receptacle.
1. Ensure that the unit is unplugged.
2. Begin cleaning the discharge line by unscrewing the Rapid Clean Plug.
• NOTE: The Roller Frame must be in a 5 gallon bucked so paint and the water mixtures will not spray and
cause property damage. Do not submerge the Handle.
• WARNING: The base unit should be as far away from the sink or bucket as possible and kept in an upright
position.
3. Place the Roller Frame in an empty 5-gallon bucket. The Roller Frame must in an empty 5 gallon bucket so
paint and water mixtures will not spray causing property damage.
4. Attach a garden hose to the Rapid Clean Adapter. Ensure there is no leaking with this connection.
5. Slowly turn the garden hose on and run water through the Hose until the discharge Hose is clean. Empty the
5-gallon bucket as necessary.
6. When the unit is clean turn the garden hose off.
7. Remove the Hose and reattached the Rapid Clean inlet Plug into the Rapid Clean Adapter.
8. Clean remaining parts. A damp cloth will remove most residual paint.
9. Plug the unit into a 3-blade grounded plug receptacle.
10. Depress the Clean/Paint switch to Paint setting. Turn the Variable Speed dial to 9. Depress the On/Off button
on the Handle to turn the Paint Roller on. Let the unit run until all fluids have been purged from the Hose
into a 5 gallon bucket.
11. Turn the unit off and unplug the unit from the 3-blade grounded plug receptacle.
C820429A_MAN_Pro Electric.indd 9
Cleaning
CLEANING WITH THE RAPID™ CLEAN FEATURE
PRO ELECTRIC PAINT ROLLER (C800804)
9
8
2
ENGLISH
5/12/10 1:37 PM