3.
General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages
of this manual.
• Familiarise yourself with the functions of the device before actually using
it. Do not allow operation by unqualified people. Any damage that may
occur will most probably be due to unprofessional use of the device.
• All modifications of the device are forbidden for safety reasons. Damage
caused by user modifications to the device is not covered by the warranty.
• Only use the device for its intended purpose. All other uses may lead to
short circuits, burns, electroshocks, lamp explosion, crash, etc. Using the
device in an unauthorised way will void the warranty.
• Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.
• A qualified technician should install and service this device.
• Lighting effects are not designed for permanent operation: regular
operation breaks will prolong their lives.
• Keep this manual for future reference.
Features
4.
• extruded aluminium profile with natural anodize coating which acts as
efficient heat sink
• standard MR16 size (fitting included)
• wash lens for smooth light output
• 12 pcs possible on one controller (LEDA03C, not included)
• indoor use only
5.
Use
• Thanks to its standard MR16 size (2", 51mm) the LEDA03 can be
installed in any downlight MR16 fixture. Refer to a professional for advice
on installing light fixtures and cabling into your ceiling or wall.
o Mounting hole max. Ø80mm, required depth at least 100mm.
o Slide cable through fixture before mounting and always secure lamp in
fixture with spring clip).
18.05.2010
Indoor use only. Keep this device away form rain,
moisture, splashing and dripping liquids.
Keep this device away from dust and extreme heat.
Protect this device from shocks and abuse. Avoid brute force
when operating the device.
LEDA03
4
Rev. 01
©Velleman nv