Cleaning And Maintenance - Unold 58410 Instrucciones De Uso

19. Wait until the appliance is cooled comple-
tely before cleaning it.
20. Check the plug and power cord regularly for
wear and damage. In case of a fault, please
send the appliance for inspection/repair
to our after sales service (address see last
page). Inadequate repair may constitute
The appliance is provided for domestic use only. The manufacturer does not assume any warranty in
case of improper, incorrect or commercial use or after repair by unauthorize third parties.
Before usING THe APPLIANce for THe fIrsT TIMe
1. Remove the product form the packaging.
2. Before using the appliance, check that the
voltage marked on the product is the same
as your supply voltage.
3. Place the appliance on a dry flat level
surface in a well ventilated room close to an
electric wall socket.
4. Ensure that the controls are set to o/MIN.
5. Connect the plug to the wall socket as per
rating label.
usING your cooKING PLATe
1. Select the desired cooking temperature of
the cooking plate you are using by turning
the dial to the required setting (1-5).
2. When cooking, always use flat bottomed
saucepans, which make good contact with
the cooking plate. Ideally, the saucepan
bases should be of the same size as the coo-
king plates.

cLeANING ANd MAINTeNANce

1. Turn all dials into the o/MIN position, unplug
the appliance and wait until it is completely
cool before cleaning.
2. Let the appliance cool down completely.
3. Do not immerse any part of this appliance in
water or any other liquid.
4. Clean the surface of the appliance by wiping
it with a soft damp cloth. Do not use strong
4
a risk for the user and result in the loss of
guarantee.
cAuTIoN:
The appliance becomes very hot during
operation!
6. When using the appliance for the first time,
it is advisable to heat the appliance once
by turning the thermostat control dials to
MAX. Leave the unit heating for around
15 minutes. Some smoke may develop
during this process.
7. Afterwards, switch off the unit by turning
the knob to o/MIN and allow it to cool com-
pletely.
8. Now your cooking plates are ready for use.
3. After use, switch off the appliance by
turning the temperature dial to o/MIN and
remove the plug from the mains socket.
4. Due to cooking plates' construction, re-si-
dual heat will remain after switching off.
This may be used to keep food warm for a
short period.
detergents of abrasive cloths/liquid, as this
will damage the surface.
5. Then, thoroughly dry the surface with a
clean dry cloth.
6. All parts of the appliance must be comple-
tely dry before using it again or before sto-
ring it.