EN -
Original instructions
I. Parts List
II. Characteristics
I. PARTS LIST
1. Connector
2. Float switch
3. Carrying handle
4. Power cable
5. Suction base
II. CHARACTERISTICS
Description
Reference
Model / Type
Voltage & frequency
Power
Max Delivery capacity
Max. pressure
Max. delivery height
Max. submersion depth
Min. water level for operation
Particle size (max)
Connector size
Weight (kg) approx.
Liquid temperature (max.)
Ambiant temperature (max)
Symbols
Caution! Risk of injury and/or damage and/or deterioration of product in case of non compliance to safety
requirements
Read the instructions manual.
Keep persons (esp. children) and animals away from product and working area
Keep hands (and all body parts) away from impeller to avoid any injury hazard.
Warning! Contact with the turbine while it is in operation can cause serious injury and damages.
Disconnect product from its power source before maintenance, cleaning or any intervention on product; or
when you do not use product.
Disconnect product from its main power source, if product, power cable, or extension cord is damaged or
cut during operation.
Unplug product by pulling the plug. Do not pull the cable.
Do not dispose of this product with household rubbish.
Dispose of this product in the nearest recycle centre.
Please contact your local authority or local recycle centre for further information for its safe disposal.
III. Safety instructions
IV. Getting Started
PRPVC751V / 511671
Fig.1
Automatic Submersible
Wastewater pump
PRPVC751V / 511671
WVSD75
220-240V ~ 50Hz
750W
21000 l/h
2bar
12m
5m
50cm
35mm
2'' (50mm)
18 kg
35C
+10C à +35C (+/-5C)
V. Operation
VI. Maintenance and Storage
PRPVC1500V / 511641
Automatic Submersible
Wastewater pump
PRPVC1500V / 511641
WQDS15-10-1.5
230V ~ 50Hz
1500W
31000 l/h
2bar
15m
5m
50cm
45mm
2'' (50mm)
29 kg
40C
+10C à 40C (+/-5C)