Important Safety Instructions For Use Of The Hammer Drill; Replacement Parts - Hitachi FDV 16VB Manual De Instrucciones

IMPORTANT SAFETY INSTRUCTIONS
FOR USE OF THE HAMMER DRILL
WARNING:
1. NEVER touch the tool bit with bare hands after operation.
2. NEVER wear gloves made of stuff liable to roll up such as cotton, wool, cloth or string,
etc.
3. ALWAYS attach the side handle and securely grip the Hammer Drill.
4. ALWAYS wear eye and ear protectors during operation.
5. ALWAYS be careful with buried object such as an underground wiring.
Touching these active wiring or electric cable with this tool, you may receive an electric
shock.
Comfirm if there are any buried object such as electric cable within the wall, floor or
ceiling where you are going to operate here after.
6. ALWAYS set the bit rotation switch lever to the R-side when boring concrete or similar
hard materials in IMPSCT mode. (Fig. 1)
7. ALWAYS set the change lever in ROTATION mode when tightening or loosening screws.
(Fig. 2)

REPLACEMENT PARTS

When servicing use only identical replacement parts.
Repairs should be conducted only by a Hitachi authorized service center.
Death or serious bodily injury could result from improper or unsafe use
of the hammer drill. To avoid these risks, follow these basic safety
instructions:
Fig. 1 Fig. 2
English
7